Brom-Start when used as directed keeps your spa system completely bromine based to eliminate chlorinous odors and to insure maximum water comfort to skin and eyes in a bromine tablet system.
1/2oz per 100gal
Cartridge Renu is a blend of cleaning agents and degreasers especialy formulated to penetrate deeply into any reuseable cartridge filter or D.E. element and remove accumulated materials like body oil, grease, dirt, and soap scum.
This product is a blend of cleaning agents and degreasers especially formulated to penetrate deeply into any reusable cartridge filter or DE element and remove the accumulated materials such as body oil, grease, dirt, and soap scum. By so doing, the cartridge is thoroughly cleaned and "renued", allowing it to be used again. Clean the filter cartridge every few weeks or at least every time you change the water, depending upon the bathing load.
Clear-Spa is a specially formulated preparation that restores clarity and refreshes murky water. It increases the efficiency of spa and hot tub filters by trapping microscopic particles suspended in cloudy water.
1oz per 500gal
The Sani-Start/Sani-Brom System is a two part system. By using Sani-Start, Sani-Brom bromine salts are activated into bromine. Rather than monitoring a float or brominator as you do with traditional bromine-based systems, Sani-Start/Sani-Brom requires one simple application.
A two part spa care kit that includes all the essentials to start up your spa and keep the water looking great.
pH Down quickly lowers the pH of your spa water. 100% Sodium Bisulfate
1/2-1oz per 500gal
pH Hold helps to manitain proper pH balance on your spa water. A single addition of pH Hold, when the spa is filed, will help maintain pH until spa is drained and refilled. Not for use on plaster spas.
1qt per 300-500gal
pH Up quickly raises the pH of your spa water. 100% Sodium Carbonate.
Foam Away is a concentrated anti-foaming agent and preventative specifically formulated for use in spas, swimming pools ans fountains, etc. When used properly, it safely eliminates foaming and bubbling caused by build up of body oils.
Freshen is a natural enzyme that cures cloudy and oily spa water by digesting and converting oils to carbon dioxide and water. It is 100% Biodegradeable, Non-Toxic, Non-Flammable, Non-Irritating, and contains no known allergens.
Hardness Control raises the hardness level of spa water. Helps prevent break down of equipment or damage to spa surfaces if water is either too soft or acidic. Calcium hardness should be 175-225 ppm
1oz per 500gal increases by 10ppm
Lustre-All is a non acidic all purpose cleaner that is safe for all spa surfaces. Specially formulated to remove body oils, grease and dirt that form that unsightly ring around the pool or spa walls.
Ring-B-Gone prevents the scum line build-up on spa surfaces due to body oil. Moisturizes skin and adds a pleasant scent to spa water.
1-2oz per 500gal
Sani-Brom is a liquid bromine salt that is used in with Sani-Start to create a non-chlorine based sanitizing system. Sani-Brom is compatible with most chemicals normally used to treat spa and hot tub water such as sanitizers, acids, bases, and algicides.
2oz per 500 gal
Spa Surface Cleaner is safe for all spa surfaces. It is meant to clean and polish most surfaces found in and around spas. It does not contain harsh acids and has been specially formulated to remove body oils, grease, and dirt that form the "bathtub ring" on spa walls.
